May 17, 2018 at 8:19 am #14352
I am having an issue deleting a partition. When attempting to delete the partition from the CLI, I get the below message. I have cleared all of the sessions per the message but I am still unable to delete the partition. Also, when attempting to delete the Partition from the GUI, I get a “Failed to delete partition, partition is being used” message. Any suggestions?
Users logged in or Admin bound to this partition ‘Test_Dev’. Please clear them first.May 17, 2018 at 12:07 pm #14382
Are you using the CLI or GUI?
Can you post in the CLI output of the following commands from config mode:
show running-config partition no partition <partition_name> id <partition_id> delete partition <partition_name> id <partition_id>
May 17, 2018 at 12:25 pm #14402
- This reply was modified 1 year ago by ericn.
I have tried both CLI and the GUI (Please see my first post). Output below:
TH3030S-Active#show running-config partition Test_Dev
!Current configuration: 452 bytes
!Configuration last updated at 08:45:45 MDT Thu May 17 2018
!Configuration last saved at 08:46:16 MDT Thu May 17 2018
ip route 0.0.0.0 /0 x.x.x.x
ip nat pool Test_NAT x.x.x.x x.x.x.x netmask /24
health monitor http_probe
slb template http HDOffline
TH3030S-Active(config)#no partition Test_Dev network-partition
Remove L3V partition and configurations therein[yes/no]:yes
Users logged in or Admin bound to this partition ‘Test_Dev’. Please clear them first.
I have cleared all of the active sessions and attempted the commands again and the deletion still fails.May 17, 2018 at 12:39 pm #14412
Which ACOS version are you using? You may need to contact Customer Support. From my memory of the older ACOS versions, you’re doing things correctly, but I’m not 100% sure.May 17, 2018 at 12:43 pm #14422
Thanks for the Feedback.
I am running 2.7.2 P7. Also to note that I have deleted and created many partitions with no issues. I am only having an issue with this single partition.
I have opened a ticket with support. I will update the forum when a solution has been implemented.May 17, 2018 at 1:29 pm #14432
Issue has been resolved. There was a user account attached to the partition that had admin rights. Removed the user from the partition and I was able to successfully delete the partition.May 17, 2018 at 2:48 pm #14442
Any commands to see the problem and clean up the problem?May 18, 2018 at 1:08 am #14472
This will show all administrators and the partitions that they are linked to.
You need to remove all rights from admins other than the default admin for the partition you want to remove.
You must be logged in to reply to this topic.