hard drive may have reached its storage limit

Community Forum Forums Thunder and AX Series General hard drive may have reached its storage limit

This topic contains 1 reply, has 2 voices, and was last updated by avatar diederik 3 weeks, 1 day ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #16790
    avatar
    isantisteban
    Member

    hard drive may have reached its storage limit, PLEASE HELP ME

    #16791
    avatar
    diederik
    Member

    For SoftAX and vThunder it’s quite common to run out of HDD space as the initial install will usually be done with the minimal requirements.

    Newer ACOS versions use up quite a bit more HDD space and features like aVCS store quite some temporary files (like upgrade packages) that can not easily be removed through the GUI or CLI.

    Do NOT assign more HDD space through your virtual environment after the system has been installed and running for a while. Current ACOS (up to 4.1.4-GR1) does not support resizing of the HDD!

    Open a case with support and let them clean out the current instance.

    Or better… reinstall completely and assign about 20-25GB to make sure you do not run into the same issue again. (For perpétuel licenses you now need support to re-issuethe license)

    If you have already increased the HDD size through your virtual environment, this will mess up the free HDD space calculation and the system will most likely tell you there is even less space available.
    I am not sure this can be undone, best reinstall with bigger HDD space assigned.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Comments are closed.