NAT Fixed Configuration

Community Forum Forums Thunder and AX Series General NAT Fixed Configuration

This topic contains 0 replies, has 1 voice, and was last updated by avatar bandalargaup 3 weeks, 4 days ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #16811
    avatar
    bandalargaup
    Member

    Hello,

    I’m having difficulty performing a NAT fixed configuration both via web and via cli.

    I created the private and public pools and when trying to configure I get the message:

    “Remove all SLB configurations (including WAF, aFlex, AAM, GSLB and Overlay) before making CGNv6 configurations”

    The issue is that I have no SLB configuration. All that could exist I removed in an attempt to configure the router.
    I have already tried to get this message in the documentation but did not find anything.

    Here’s my setup:

    ! 64-bit Advanced Core OS (ACOS) version 4.1.4-GR1-P1, build 78 (Mar-28-2019,21: 06)
    !
    access-list 100 permit ip host 192.168.10.0 0.0.0.255 any
    !
    access-list 100 permit ip 10.255.0.0 0.0.0.127 any
    !
    in the auto-size terminal
    terminal length 0
    !
    hostname A10-CGNAT-01
    !
    ntp server a.ntp.br
    !
    web-service auto-redirt disable
    web-service axapi-timeout-policy idle 60
    web-service gui-timeout-policy idle 60
    web-service secure-port 7022
    web-service server disable
    !
    interface management
      ip address 172.31.31.31 255.255.255.0
    !
    ethernet interface 1
    !
    ethernet interface 2
    !
    ethernet interface 3
    !
    ethernet interface 4
    !
    ethernet 5 interface
    !
    ethernet interface 6
    !
    ethernet interface 7
    !
    ethernet interface 8
    !
    ethernet interface 9
      name RTR-P2-01-WAN
      enable
      trunk-group 1 lacp
    !
    10 ethernet interface
      name RTR-01-LAN
      enable
      trunk-group 2 lacp
    !
    ethernet interface 11
    !
    ethernet interface 12
    !
    interface trunk 1
      name RTR-WAN
      ip address 10.100.0.6 255.255.255.252
      ip nat outside
      ipv6 nat outside
    !
    interface trunk 2
      name RTR-LAN
      ip address 10.100.0.10 255.255.255.252
      ip nat inside
      ipv6 nat inside
    !
    interface loopback 1
      ip address 10.255.0.1 255.255.255.255
    !
    !
    ip nat alg pptp enable
    !
    disable-management service ssh
      management
    !
    enable-management service ssh
      ethernet 9 to 12
    !
    enable-management service http
      ethernet 1 to 12
    !
    enable-management service https
      ethernet 1 to 12
    !
    enable-management service snmp
      ethernet 1 to 12
    !
    ip route 0.0.0.0 / 0 10.100.0.5
    !
    ip-list LAN_CGNAT-00
      100.64.0.0 to 100.64.7.255
    !
    ip-list WAN_CGNAT-00
      168.0.72.0 to 168.0.72.127
    !
    !
    !
    end

    Thanks

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

Comments are closed.