VCS avec VRRP-a shows unknown status

Community Forum Forums Thunder and AX Series VCS avec VRRP-a shows unknown status

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by avatar ericn 3 months, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #15332
    avatar
    pinla11
    Member

    Hello,

    I have a problem with my VRRP-a configuration. Everything works fine, I dont have problem with the service but when I login into the ADC I see the VRRP-a status as unknown.

    Here’s some troubleshooting I have done:
    AX-vMaster[1/1]#sh vcs summary

    VCS Chassis:
    VCS Enabled: Yes
    Chassis ID: 1
    Floating IP: 10.20.10.102
    Mask: 255.255.255.0
    Multicast IP: 224.0.0.210
    Multicast Port: 41217
    Version: 2.7.2-P12-SP3.b3
    VCS Monitor Sync: DISABLE

    Members(* means local device):
    ID State Priority IP:Port Location Sync-State
    ———————————————————————————————
    1 vMaster(*) 200 10.20.10.103:41216 Local
    2 vBlade 190 10.20.10.104:41216 Remote N/A

    Ax-1-vMaster[1/1]#show vrrp-a
    vrid 1
    Unit State Weight Priority
    1 (Local) Active 65534 200
    became Active at: Aug 31 10:13:52 2018
    for 0 Day, 3 Hour,24 min
    2 (Peer) Standby 65534 200 *
    vrid 2
    Unit State Weight Priority
    1 (Local) Active 65534 255
    became Active at: Aug 31 11:42:33 2018
    for 0 Day, 1 Hour,55 min
    2 (Peer) Standby 65534 255 *
    Running VRID(s): 1 2

    Here’s the configuration:
    vrrp-a device-id 1
    vrrp-a set-id 2
    vcs enable
    vcs vMaster-id 2
    vcs chassis-id 2
    vcs floating-ip 10.20.10.105 /24
    vcs multicast-ip 224.0.0.210
    vcs device 1
    priority 200
    interfaces management
    enable
    vcs device 2
    priority 190
    interfaces management
    enable
    !
    vcs local-device 1
    vrrp-a enable
    vrrp-a hostid_append_to_vrid default
    vrrp-a vrid default
    priority 200 device 1
    priority 200 device 2
    !
    vrrp-a vrid 1
    floating-ip 10.20.111.8
    priority 200 device 1
    priority 190 device 2
    tracking-options
    gateway 10.20.111.3 priority-cost 1 device 2
    !
    vrrp-a vrid 2
    floating-ip 10.20.111.9
    priority 255 device 1
    priority 200 device 2
    tracking-options
    gateway 10.20.111.3 priority-cost 1 device 2
    !
    vrrp-a interface ethernet 3 device 1
    vrrp-a interface ethernet 3 device 2
    vrrp-a preferred-session-sync-port ethernet 3 vlan 4001 device 1
    vrrp-a preferred-session-sync-port ethernet 3 vlan 4001 device 2
    !

    Thanks in advance for your help

    #15342
    avatar
    ericn
    Member

    Things look good to me. What do you mean “VRRP-a status as unknown”. I don’t see anything saying unknown

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Comments are closed.