VCS UNSYNC

This topic contains 1 reply, has 2 voices, and was last updated by avatar hkohn72 6 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13742
    avatar
    gpinero
    Member

    Hi all.
    how can we force the synchronization.

    vcs reload not work

    Image attached. Thanks

    #13782
    avatar
    hkohn72
    Member

    Hello undergl,

    vcs reload is not working because on the vBlade you can’t enter the config mode.
    In this case you will resync the vBlade with “vcs disable” and “vcs enable” in admin mode.

    After that the vBlade is handshaking with the vMaster and resyncing.
    Please be aware that all ADPs have to bee on vMaster box and the vBlade will be restarted.

    If this don’t help you please open a case at support@a10networks.com to work on this problem.

    CU Holger!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Comments are closed.