Virtual Server One port hearing and Multiple port Balance

Community Forum Forums Thunder and AX Series Virtual Server One port hearing and Multiple port Balance

This topic contains 1 reply, has 2 voices, and was last updated by avatar diederik 2 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #15992
    avatar
    Hugo Gomez
    Member

    Hi community

    I want to know if it is possible to balance between two different real servers that use ten different ports each of them.
    This using only One Virtual Server hearing in only one port

    This is a configuration example what I’m talking:

    slb server DNS1_SERVER 100.18.1.200
    health-check-disable
    port 80 tcp
    health-check-disable
    port 5000 tcp
    health-check-disable
    port 6000 tcp
    health-check-disable
    port 7000 tcp
    health-check-disable
    port 8000 tcp
    health-check-disable
    port 9000 tcp
    health-check-disable
    port 1000 tcp
    health-check-disable
    !
    slb server DNS2_SERVER 100.18.1.201
    health-check-disable
    port 80 tcp
    health-check-disable
    port 5000 tcp
    health-check-disable
    port 6000 tcp
    health-check-disable
    port 7000 tcp
    health-check-disable
    port 8000 tcp
    health-check-disable
    port 9000 tcp
    health-check-disable
    port 1000 tcp
    health-check-disable

    slb service-group SLB_DNS_1/2_SG tcp
    method least-connection
    member DNS1_SERVER 80
    member DNS1_SERVER 5000
    member DNS1_SERVER 6000
    member DNS1_SERVER 7000
    member DNS1_SERVER 8000
    member DNS1_SERVER 9000
    member DNS1_SERVER 1000
    member DNS2_SERVER 80
    member DNS2_SERVER 5000
    member DNS2_SERVER 6000
    member DNS2_SERVER 7000
    member DNS2_SERVER 8000
    member DNS2_SERVER 9000
    member DNS2_SERVER 1000

    slb virtual-server ADC-SLB_M_MITEC 172.28.85.162
    extended-stats
    port 443 https
    extended-stats
    service-group SLB_DNS_1/2_SG
    use-rcv-hop-for-resp

    I want to know if the above configuration can works.

    Your comments will be very appreciated

    Thanks,

    #16002
    avatar
    diederik
    Member

    Yes that is exactly how it should work.

    Do realise that when using the method “least-connection” the ADC will still keep track of the nr of sessions per “server”, if the servers tie, then it will select the server-port with the fewest connections.

    If both servers have the same amount of ports (as in your case) you can also use the “service-least-connections” method to achieve an even nr of connections per server and per port. (assuming both servers will always have the same nr of ports active).

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Comments are closed.